Kemppi offering for

Ancillary products

A wide variety of accessories to boost efficiency


Browse our ancillary products

Ancillary products


ArcInfo

A web-based service for recording, presenting, and analyzing welding data.ArcInfo...

A web-based service for recording, presenting, and analyzing welding data.

ArcInfo converts raw welding parameter data into visual presentations. The DataCatch hardware is used to collect the data from the welding machine and deliver it to your laptop.

Kemppi DataCatch product image

DataCatch

For collecting and transferring welding data to ArcInfo. The device connects easily t...

For collecting and transferring welding data to ArcInfo. The device connects easily to Kemppi FastMig welders and a laptop.

Kemppi Euro Adapter for MinarcMig and MinarcMig Evo product image

Euro Adapter for MinarcMig and MinarcMig Evo

Euro Adapter for MinarcMig and MinarcMig Evo takes your connectivity to a whole new l...

Euro Adapter for MinarcMig and MinarcMig Evo takes your connectivity to a whole new level.

Kemppi GH 10 Gun holder product image

GH 10 Gun holder

GH 10 Gun holder increases the usability around the workshop. The gun holder can be m...

GH 10 Gun holder increases the usability around the workshop. The gun holder can be mounted on a welding machine, transport unit, or welding table.

Kemppi GH 20 Gun holder product image

GH 20 Gun holder

GH 20 Gun holder increases the usability around the workshop. The gun holder can be m...

GH 20 Gun holder increases the usability around the workshop. The gun holder can be mounted on a welding machine, transport unit, or welding table.

Kemppi GH 30 Gun holder product image

GH 30 Gun holder

GH 30 Gun holder increases the usability around the workshop. The gun holder can be m...

GH 30 Gun holder increases the usability around the workshop. The gun holder can be mounted on a welding machine, transport unit, or welding table.

Kemppi Gas Guard 200/300 product image

Gas Guard 200/300

For preventing welding in the absence of shielding gas supply.Gas guard can be a...

For preventing welding in the absence of shielding gas supply.

Gas guard can be added to MXF 63, 65,67, MXP 37 PIPE, and MXP 38.

Kemppi KV 401 Swing Boom Arm product image

KV 401 Swing Boom Arm

KV 401 Swing boom arm is an ideal for controlled reach around the workshop.This u...

KV 401 Swing boom arm is an ideal for controlled reach around the workshop.

This unit is suitable for MXF 65,67, MXP 37 PIPE, MXP 38, and ArcFeed.

Kemppi Boom arm product image

Boom arm

The boom arm is an additional item which can be mounted on a flat surface around your...

The boom arm is an additional item which can be mounted on a flat surface around your workshop. The boom arm provides cable support, thus freeing additional floor space.

Kemppi MXF 65 hanging kit product image

MXF 65 hanging kit

The MXF 65 hanging kit is meant for hanging the power source. This solution helps to ...

The MXF 65 hanging kit is meant for hanging the power source. This solution helps to create more versatile work spaces around the workshop. This unit is only suitable for MXF 65.

Kemppi KFH 1000 product image

KFH 1000

KFH 1000 is a movable option for hanging cables. This solution helps to create more v...

KFH 1000 is a movable option for hanging cables. This solution helps to create more versatile work spaces around the workshop.

This unit is suitable for MXF 63, 65, 67, MXP 37 PIPE, MXP 38, WFX 200, 200 P, 200 AMC
WFX 300, 300 P, 300 AMC and ArcFeed.

Kemppi MXF 63 hanging frame product image

MXF 63 hanging frame

The MXF 63 hanging frame is a metal frame for hanging up your power source. This solu...

The MXF 63 hanging frame is a metal frame for hanging up your power source. This solution helps to create more versatile work spaces around the workshop. This unit is only suitable for MXF 63.

Kemppi KWF 200/300 cabinet heater product image

KWF 200/300 cabinet heater

The cabinet heater maintains a temperature level inside the wire feed cabinet for con...

The cabinet heater maintains a temperature level inside the wire feed cabinet for conditions where the ambient temperature cycles up and down.

This unit is suitable for MXF 63, 65, 67, MXP 37 PIPE, and MXP 38.

Kemppi KV 200 product image

KV 200

The KV 200 mounting plate for two wire feeders.This unit is suitable for MXF 63, ...

The KV 200 mounting plate for two wire feeders.

This unit is suitable for MXF 63, 65, 67, MXP 37 PIPE, MXP 38, and ArcFeed.

Kemppi Kemppi 200 Earth clamp product image

Kemppi 200 Earth clamp

Earth clamp with 200 A capacity, 25 – 35 mm jaw opening, and ⌀ 6 mm cable shoe connec...

Earth clamp with 200 A capacity, 25 – 35 mm jaw opening, and ⌀ 6 mm cable shoe connection.

Choose Kemppi for safe, grounded welding.

Kemppi Kemppi 300 Earth clamp product image

Kemppi 300 Earth clamp

Earth clamp with 300 A capacity, 50 – 70 mm jaw opening, and ⌀ 6 mm cable shoe connec...

Earth clamp with 300 A capacity, 50 – 70 mm jaw opening, and ⌀ 6 mm cable shoe connection. There is a copper braid between the connector jaws.

Choose Kemppi for safe, grounded welding.

Kemppi Kemppi 500 Earth clamp product image

Kemppi 500 Earth clamp

Earth clamp with 500 A capacity, 70 – 95 mm jaw opening and ⌀ 8 mm cable shoe connect...

Earth clamp with 500 A capacity, 70 – 95 mm jaw opening and ⌀ 8 mm cable shoe connection. There is a copper braid between the connector jaws.

Choose Kemppi for safe, grounded welding.

Kemppi Kemppi G-600 Earth clamp product image

Kemppi G-600 Earth clamp

Earth clamp with 600 A capacity, 35 - 120 mm opening and cable connection with a hex ...

Earth clamp with 600 A capacity, 35 - 120 mm opening and cable connection with a hex screw. This screw-type clamp has a brass frame.

Choose Kemppi for safe, grounded welding.

Kemppi KEMPPI 300 Electrode holder product image

KEMPPI 300 Electrode holder

Electrode holder with 300 A capacity (150 A 60 % ED/200 A 35 % ED). Cable connection ...

Electrode holder with 300 A capacity (150 A 60 % ED/200 A 35 % ED). Cable connection with a hex screw for 16 – 25 mm² sized cables.

The KEMPPI 300 is well insulated, lightweight at 321 g, and has a copper alloy frame for high electrical conductivity.

Kemppi KEMPPI 400 Electrode holder product image

KEMPPI 400 Electrode holder

Electrode holder with 400 A capacity (200 A 60 % ED/250 A 35 % ED). Cable connection ...

Electrode holder with 400 A capacity (200 A 60 % ED/250 A 35 % ED). Cable connection with a hex screw for 16 – 25 mm² sized cables.

The KEMPPI 400 is well insulated, lightweight at 421 g, and has a copper alloy frame for high electrical conductivity.

Kemppi URANIA 5 Electrode holder product image

URANIA 5 Electrode holder

Electrode holder with 500 A capacity (250 A 60 % ED/300 A 35 % ED). Cable connection ...

Electrode holder with 500 A capacity (250 A 60 % ED/300 A 35 % ED). Cable connection with a hex screw for 35 – 50 mm² sized cables. The URANIA 5 is well-insulated, weighs 500 g, and has a copper alloy frame for high electrical conductivity.

Kemppi URANIA 6 Electrode holder product image

URANIA 6 Electrode holder

Electrode holder with 600 A capacity (300 A 60 % ED/400 A 35 % ED). Cable connection ...

Electrode holder with 600 A capacity (300 A 60 % ED/400 A 35 % ED). Cable connection with a hex screw for 50 – 70 mm² sized cables. The URANIA 6 is well insulated, weighs 855 g, and has a copper alloy frame for high electrical conductivity.

Kemppi MYKING 200 Electrode holder product image

MYKING 200 Electrode holder

Electrode holder with 200 A capacity. Double-screwed cable connection for 10 – 25 mm²...

Electrode holder with 200 A capacity. Double-screwed cable connection for 10 – 25 mm² sized cables.

The MYKING 200 is well-insulated, lightweight at 285 g, and has a copper alloy frame for high electrical conductivity.

Kemppi MYKING 450 Electrode holder product image

MYKING 450 Electrode holder

Electrode holder with 450 A capacity. Double-screwed cable connection for 35 – 70 mm²...

Electrode holder with 450 A capacity. Double-screwed cable connection for 35 – 70 mm² sized cables.

The MYKING 450 is well-insulated, weighs 485 g, and has a copper alloy frame for high electrical conductivity.

Kemppi MYKING 600 Electrode holder product image

MYKING 600 Electrode holder

Electrode holder with 600 A capacity. Double-screwed cable connection for 50 – 70 mm²...

Electrode holder with 600 A capacity. Double-screwed cable connection for 50 – 70 mm² sized cables.

The MYKING 600 is well-insulated, weighs 535 g, and has a copper alloy frame for high electrical conductivity.

Kemppi MXF 63 Protection sliders product image

MXF 63 Protection sliders

MXF 63 protection sliders add safety and stability to your power source. This unit is...

MXF 63 protection sliders add safety and stability to your power source. This unit is only suitable for the MXF 63.

Kemppi KVF 300 Protection sliders product image

KVF 300 Protection sliders

KVF 300 protection sliders add safety and stability to your power source. This unit i...

KVF 300 protection sliders add safety and stability to your power source. This unit is suitable for the MXP 37 Pipe and WFX 300 P.

Kemppi GT 4000 Electrode holder product image

GT 4000 Electrode holder

Product is intended to be used in carbon-arc gouging. It is suitable for use with the...

Product is intended to be used in carbon-arc gouging. It is suitable for use with the KempGouge™ ARC 800 arc gouging machine. The gouging carbon used in the electrode holder can be round or flat. The air pressure used for gouging can be adjusted by the control knob on the electrode holder.


DataGun

Kemppi DataGun is a programming device that is used together with Kemppi DataStore on...

Kemppi DataGun is a programming device that is used together with Kemppi DataStore online shop to purchase and install welding software and upgrades to your Kemppi welding machines.


DataMaster II

DataMaster II is a general-purpose programming, setup and calibration tool for severa...

DataMaster II is a general-purpose programming, setup and calibration tool for several Kemppi welding machine models.

Close

Technical specifications