KempArc Pulse

Cooling unit suitable for use with Kemppi KempArc welding equipment. KempCool 10 performs 1 kW of cooling power with a three liter tank that can be filled with 20%-40% ethanol/water mixture, or any other suitable antifreeze agent.

Product code: 6208100 Cooling liquid - 10 liter can - SP9810765

For easy transport and keeping floor free under welder.

Product code: 6185295

Product code: See technical specifications

Fieldbus commnucation between power source and robot controller is enabled with modules. The protocol can be chosen based on customer preference. Modules are placed inside the KempArc robot interface chassis.

Product code: See technical specifications

The interconnection cable set contains several cables and hoses. The cable set is used for delivering the welding power, shielding gas, cooling liquid, and control signals from the welding power source to the wire feeder. Interconnection cable sets are available in zipper bags or in corrugated sleeves.

Product code: See technical specifications

Product code: See technical specifications

Earth return cable, available 70 mm² thick and 5, 10, and 15 m long.

Product code: 6184711 (5 m, 70 mm²), 6184712 (10 m, 70 mm²), 6184713 (15 m, 70 mm²)

High quality wire conduit delivers the filler wire smoothly from wire spool to wire feeder. Male connectors on both ends fit to Kemppi feeder and Kemppi wire spool support. Order codes does not include female snap connector for wire spool holder or wire drum. It must be ordered separately. In case of stainless steel or aluminium, a separate chili liner is also required.

Product code: See technical specifications

Alternative solution for wire conduit when distance between wire feeeder and wire drum is greater than 5 meters. NOTE: When ordering W005195 with the desired length, you also need snap connectors: two male (W005197) and one female (W005189).

Product code: See technical specifications

Male connector for wire conduit. Note! Two pieces needed per conduit

Product code: W005197

Female connector for the wire drum or spool holder.

Product code: W005189

Suitable for standard 15 kg wire coil. NOTE: Female connector for wire conduit not included. Must be ordered separately.

Product code: W007628 (right), W007629 (left)

Plastic cover for wire spool holder.

Product code: SP007940

Floor stand for wire spool holder.

Product code: W007356

Brackets for mounting the wire feeder on the robot’s 3rd axis. The design is robot model specific. Order code includes metal plates. Insulation rings and Screws are not included if order code begins with W.

Product code: See technical specifications

Regular mechanical cleaning of the internal surfaces of the gas nozzle provides steady and good shielding gas flow for welding. Helps to avoid spatter to form electrical connection bridges between contact tip and the gas nozzle.

Product code: SP600674 Equipped with wire cutter, gas nozzle inside reamer and anti-spatter spray unit; order code includes reamer setup for both gas and water cooled nozzles.

Enables the use of push-pull torches.

Product code: W005377

Additional module incorporated in robot interface that enables parameter setup and control through a web user interface. Suitable for use with KempArc Pulse automated welding equipment.

Product code: 6202200

Offers remote welding control for KempArc Pulse power source.

Product code: 6200800

Monitors minimum limit of gas flow

Product code: SP600434