FastMig X Intelligent

Support for FastMig X Intelligent

linkedin facebook twitter

Scroll down for more

Support FAQ

Where can I get service and/or consumable parts for Kemppi equipment?

You can get service and consumables from your nearest Kemppi representative. Please see our representatives near you.

How can I find the closest Kemppi service workshop near me?

You can find the closest repair workshop from our map search.

What kind of a warranty does Kemppi equipment have?

Kemppi welding equipment is designed and tested for professional industrial environments. As a guarantee of high quality, we offer our customers a global warranty up to three years.

For full details, see Kemppi Warranty.

Your equipment FAQ

What does the different error codes mean?

All the error codes are explained in the user manual in detail.

How can I update the software on machine?

Please contact the nearest authorized Kemppi service & repair workshop.

What is the recommended mains fuse size and type?

Technical specifications in the user manual has the recommended model and size.

What are the part numbers and prices for spare parts?

You can find our spare and wear part numbers and prices from the nearest Kemppi representative.

Where is my nearest service workshop?

Please see the contact map for repair and service workshops.

How can I find the correct consumable kit for my MIG/MAG machine?

You can use our consumable kit finder tool to find the correct one.

What is the warranty on my equipment?

Global Kemppi warranty up to three years. You can get more information from your nearest Kemppi representative.

Mains and generator use, what do I need to do if anything?

If no mains connection is available, you can use FastMig X 350 and X 450 on a generator. The minimum recommended generator output is 35 kVA. The greater the output, the more stable is the FastMig X power source operation.

On my FastMig X machine, what is the normal cooling fan sequence, start up and in operation?

FastMig X power sources incorporate two simultaneously operating fans.

The fan is started momentarily when the main switch is turned into position I.
The fan will start during welding as the machine reaches operational temperature, and it will continue running for 1 to 10 minutes after the welding has stopped, depending on the welding cycle completed.

How to change gas cooled / water cooled selection?

The factory default setting for FastMig X is AUTO. If a cooling unit is not connected and the operator tries to establish air-cooled operation together with an air-cooled gun, Err 27 is displayed. To establish air-cooled operation, select cooler ‘OFF’.

This is done in the ‘System Config Menu’ as follows: Press the Menu button on the X 37 power source panel. Move the menu display arrow (via panel's left-hand up-down arrow keys) to select ‘System Config Menu’ and then press the select button. Choose ‘Water Cooling:Auto’ and change via control knob to setting ‘Water Cooling:OFF’, then press Back/Exit. Cooler will then be set to the ‘OFF’ state for air-cooled operation. Reset power source via on/off switch and continue welding.

When selected, the operation of the cooling unit is automatic, starting when welding commences. When welding stops the pump will continue operation for approx. 5 min, so reducing the gun and the cooling liquid to ambient temperature.

Were you looking for these?

Find a service workshop for repair and maintenance

FastMig X Intelligent Technical specifications

Find support for another product

Got questions?

Please don't hesitate to contact us if you experience any further problems or have any questions