Kempact Pulse 3000

Support for Kempact Pulse 3000

Guides and Manuals

Kempact Pulse 3000

Kempact Pulse 3000

Support FAQ

Where can I get service and/or consumable parts for Kemppi equipment?

You can get service and consumables from your nearest Kemppi representative. Please see our representatives near you.

How can I find the closest Kemppi service workshop near me?

You can find the closest repair workshop from our map search.

What kind of a warranty does Kemppi equipment have?

Most of our equipment is covered for 2 years. For full details, see Kemppi Warranty.

Your equipment FAQ

What does the different error codes mean?

All the error codes are explained in the user manual in detail.

How can I update the software on machine?

Please contact the nearest authorized Kemppi service & repair workshop.

What is the recommended mains fuse size and type?

Technical specifications in the user manual has the recommended model and size.

What are the part numbers and prices for spare parts?

You can find our spare and wear part numbers and prices from the nearest Kemppi representative.

Where is my nearest service workshop?

Please see the contact map for repair and service workshops.

How can I find the correct consumable kit for my MIG/MAG machine?

You can use our consumable kit finder tool to find the correct one.

What is the warranty on my equipment?

Kemppi 2 year warranty. You can get more information from your nearest Kemppi representative.

Mains and generator use, what do I need to do if anything?

Restrictions on generator type and power may apply in generator use. Fault free operation of a three-phase machine also requires a sufficiently highpower generator. The power recommendation is more than 15 kVA.

How to change gas cooled / water cooled selection?

Cooler must be activated by using SETUP function.

Parameter name: Water Cooler On/Off Selection
Display: Coo
Values: On/Off

Changing parameters
By pressing the 2T/4T (SETUP) selection switch a little longer the machine will enter the SETUP state. The display will show the set parameter’s runnning number (blinking), its abbreviation and value. Select the parameter number using the “SYNERGIC PRG” + and - buttons or the “SETUP” button (which will jump by tens). Change the value using the control button (in some cases, the value can be found from the synergy curve). “Syn” and the curve value will blink by turns on the right of the display. Set the value by turning the button anticlockwise.


Exit for SETUP using a long press.

Got questions?

Please don't hesitate to contact us if you experience any further problems or have any questions

Close

Technical specifications