MicroTack revolutionizes the tack welding of thin sheet metal

Innovatie

MicroTack revolutionizes the tack welding of thin sheet metal

18 juni 2019

Tack welding is one of the most important work phases before welding. In tacking, the structural parts are combined with short tack welds in preparation for the actual welding. The tack welds keep the parts in the correct position in relation to each other until the welding has been done.

Petteri Jernström

Petteri Jernström
Author

Petteri Jernström

Vice President, Technology at Kemppi Oy until February 2020. A technology innovator with extensive experience across a variety of sectors and roles in the welding industry. Curious about discovering, learning, and inventing new ways of doing things. Petteri holds a Doctor of Science degree in Welding Technology from the Lappeenranta University of Technology, Finland.

Meer blogberichten

Rolex fixed by welding

Rolex fixed by welding

A Norwegian Rolex owner saved a fine sum of money when the wristband of his valuable timepiece was fixed by welding. The owner tried to take the watch to various watchmakers in Oslo to have it repaired. Several attempts were made to fix the wristband by, for instance gluing, but they all failed. One of these craftsmen suggested welding to fix the wristband but did not want to try it himself, in case the heat was to cause even more damage.

Handmatig lassen

Up to 38 % savings with Reduced Gap Technology

Up to 38 % savings with Reduced Gap Technology

The groove angle has a direct impact on the efficiency and productivity of welding heavy metal structures. Kemppi's new solution, Reduced Gap Technology (RGT) changes the understanding of narrow gap welding. The new technology challenges conventional joint design principles.

Innovatie

The diversity of welding

The diversity of welding

Joonas Innanen, 27, is one of the newer generation of welders. Although he studied traditional methods of welding from MIG to TIG, he has also adopted new technologies during his career.

Mensen

Hoe Kemppi zijn partners succesvol laat cobotlassen

Hoe Kemppi zijn partners succesvol laat cobotlassen

In dit artikel bespreken we de ontwikkelingen rondom het cobotlassen met twee experts uit de industrie: Alessio Cocchi, Global Cobot Sales & Marketing Manager bij ABB en Jakub Bancer, Key Account Manager bij FANUC.

Lasautomatisering, Mensen

Lifecycle assessment in welding: A data-driven path to sustainability

Lifecycle assessment in welding: A data-driven path to sustainability

Lifecycle assessment (LCA) is a systematic method for evaluating a product’s environmental impact throughout its lifespan—from raw material extraction and manufacturing to usage and end-of-life disposal.

Handmatig lassen

Schrijf u in op onze nieuwsbrief en wees als een van de eersten op de hoogte van het laatste nieuws van Kemppi.

Door u te abonneren, gaat u ermee akkoord marketing-e-mails van Kemppi te ontvangen.

De voorloper op het gebied van booglassen

Kemppi is dé toonaangevende ontwerper in de booglasindustrie. We zijn vastbesloten om de kwaliteit en productiviteit van lassen aan te jagen door voortdurend verder te ontwikkelen en te werken aan een groenere meer gelijke wereld. Kemppi levert geavanceerde duurzame producten, digitale oplossingen en diensten voor professionals aan zowel industriële lasbedrijven als zelfstandige aannemers. Het gebruiksgemak en de betrouwbaarheid van onze producten zijn onze leidraad. We werken met een netwerk van zeer vakkundige partners in meer dan 70 landen om onze expertise beschikbaar te stellen. Kemppi, waarvan het hoofdkantoor is gevestigd in Lahti, Finland, heeft meer dan 650 professionals in 16 verschillende landen in dienst en genereert een jaaromzet van 209 miljoen euro.

Kemppi – Designed for welders

Copyright © 2025 Kemppi Oy