Handmatig lassen
Welding in hot conditions in Saudi Arabia
4 augustus 2019
Pipelines are built in many different places, from freezing cold Siberia to the plains of Central Asia and the scorching deserts in the Arabian peninsula and Africa. Every year, thousands of kilometers of pipelines are installed and maintained in extreme conditions that are incomparable to the steady, stable temperature conditions of the workshop. Pipelines may be installed and repaired at temperatures below -20°C or above +50°C.
Jani Kumpulainen
Jani Kumpulainen
Jani Kumpulainen
Welding Technology Manager at Kemppi Oy. International Welding Engineer (IWE) and Inspector (IWI-C) who has over 10 years of experience as a welding expert in welding process development, welding coordination of pressure vessels and international sales. Interested in understanding the whole welding industry including welding processes, weldable materials, and welding quality standards.
Gerelateerde producten
Productfamilie
De Master S is ontworpen voor elektrodelassen (MMA) met hoge prestaties. De stroombron met karakteristiek voor celluloselassen zorgt voor geweldige lasresultaten en een plezierige laservaring.
Productfamilie
WiseRoot is een geoptimaliseerd kortsluitbooglasproces voor het lassen van grondlagen zonder smeltbadondersteuning.
Meer blogberichten
Welding in arctic conditions
Today, Arctic areas are attracting much attention due to the large oil and natural gas deposits located there. As much as 13% of the Earth's unexploited oil reserves and 30% of natural gas reserves may be located in Arctic areas. The energy industry's largest projects to build gas and oil distribution networks are essentially based on steel construction and welding technology.
Handmatig lassen
Up to 38 % savings with Reduced Gap Technology
The groove angle has a direct impact on the efficiency and productivity of welding heavy metal structures. Kemppi's new solution, Reduced Gap Technology (RGT) changes the understanding of narrow gap welding. The new technology challenges conventional joint design principles.
Innovatie
Wise pipe welding at IIW 2015
Once a year, all welding professionals in the world gather together to share their expertise and insights on the welding industry. The 68th IIW Annual Assembly and International Conference is currently in motion in Helsinki, Finland.
Handmatig lassen
Kemppi's advanced welding processes: MIG/MAG welding
One of the most important elements in developing welding equipment has long been improving welding processes and creating new process variations. Modern measurement and arc control methods have made a wide range of variations in the arc welding process possible. These advanced welding processes significantly improve welding production efficiency and weld quality. This article presents the special processes and operations developed by Kemppi for MIG/MAG welding.
ABC van het lassen, Handmatig lassen
How WeldEye welding management software sets the standard for welding traceability
Welding traceability is becoming an increasingly essential requirement in industries where safety, quality, and compliance are paramount.
Digitalisering
Cobot welding automates manual welding for superior efficiency and quality
Cobot welding integrates collaborative robots (cobots) into welding processes to enhance productivity, quality, and safety.
Lasautomatisering
