Handmatig lassen
Welding industry – 6 ways to save energy
24 januari 2023
The energy crisis is real, and it is here now. It affects the energy-intensive welding industry because welding refers to the uniting or fusing of pieces by using heat and/or compression so that the pieces form a continuum, thus consuming plenty of energy. How can we cut energy consumption in the welding industry? Unless we're prepared to weld by candlelight, we cannot simply refuse to weld until the energy crisis is over. But there is a solution, small changes to daily work can result in significant energy savings in the long run.
Anu Rousku
Anu Rousku
Anu Rousku
Marketing Communications Specialist at Kemppi Oy until September 2020. Experienced professional in content marketing with a demonstrated history of working in the industrial B2B sector. Playing with words, persuading the reader, with the spirit of getting things done – it is all seen in the result.
Gerelateerde producten
Productfamilie
Een lasfunctie voor gegarandeerde inbranding bij synergisch MIG/MAG-lassen.
Productfamilie
Een lasfunctie die speciaal is ontwikkeld om de uitdagingen van het globulaire overgangsgebied aan te pakken. WiseSteel combineert kortsluitboogovergangen met druppelovergangen, wat resulteert in hoogwaardige lassen met een regelmatig en gelijkmatig vissenschubpatroon.
Productfamilie
De geoptimaliseerde lasfunctie WiseFusion produceert een zeer smalle en geconcentreerde lasboog, waardoor het lassen sneller verloopt en de warmte-inbreng lager is.
Meer blogberichten
The heat resistance of the HD welding gun makes a welder's work more efficient
When the workload gets heavy and the days get longer, both welders and their welding guns heat up. Emotions can be cooled down with a cup of coffee, but the welding gun only cools down by taking regular breaks. To keep these breaks as short as possible, optimizing the thermal conductivity and heat resistance of the welding gun are important in daily work.
Handmatig lassen
Kemppi and the EU Ecodesign Directive
As of January 1st 2021, the European Union established an Ecodesign Directive that directly applies to any energy-using products sold in the member states, including welding machines. What does this mean, and what can a manufacturer do to keep up with the directive? Is it possible for the welding machine industry to become fully green? At Kemppi, environmental awareness is simply one of our operating principles.
Innovatie
Responsibility is a way of working
In these times of energy crisis and climate change, many eyes are turned towards the manufacturing industry. How can a manufacturer stand for responsibility while also working towards both a profitable and environmentally friendly future? True responsibility is more than an obligation, it is an integrated feature.
Mensen
Kemppi's advanced welding processes: MIG/MAG welding
One of the most important elements in developing welding equipment has long been improving welding processes and creating new process variations. Modern measurement and arc control methods have made a wide range of variations in the arc welding process possible. These advanced welding processes significantly improve welding production efficiency and weld quality. This article presents the special processes and operations developed by Kemppi for MIG/MAG welding.
ABC van het lassen, Handmatig lassen
How WeldEye welding management software sets the standard for welding traceability
Welding traceability is becoming an increasingly essential requirement in industries where safety, quality, and compliance are paramount.
Digitalisering
Cobot welding automates manual welding for superior efficiency and quality
Cobot welding integrates collaborative robots (cobots) into welding processes to enhance productivity, quality, and safety.
Lasautomatisering
