MicroTack revolutionizes the tack welding of thin sheet metal

Innovasjon

MicroTack revolutionizes the tack welding of thin sheet metal

18. juni 2019

Tack welding is one of the most important work phases before welding. In tacking, the structural parts are combined with short tack welds in preparation for the actual welding. The tack welds keep the parts in the correct position in relation to each other until the welding has been done.

Petteri Jernström

Petteri Jernström
Author

Petteri Jernström

Vice President, Technology at Kemppi Oy until February 2020. A technology innovator with extensive experience across a variety of sectors and roles in the welding industry. Curious about discovering, learning, and inventing new ways of doing things. Petteri holds a Doctor of Science degree in Welding Technology from the Lappeenranta University of Technology, Finland.

Flere blogginnlegg

Rolex fixed by welding

Rolex fixed by welding

A Norwegian Rolex owner saved a fine sum of money when the wristband of his valuable timepiece was fixed by welding. The owner tried to take the watch to various watchmakers in Oslo to have it repaired. Several attempts were made to fix the wristband by, for instance gluing, but they all failed. One of these craftsmen suggested welding to fix the wristband but did not want to try it himself, in case the heat was to cause even more damage.

Manuell sveising

Up to 38 % savings with Reduced Gap Technology

Up to 38 % savings with Reduced Gap Technology

The groove angle has a direct impact on the efficiency and productivity of welding heavy metal structures. Kemppi's new solution, Reduced Gap Technology (RGT) changes the understanding of narrow gap welding. The new technology challenges conventional joint design principles.

Innovasjon

The diversity of welding

The diversity of welding

Joonas Innanen, 27, is one of the newer generation of welders. Although he studied traditional methods of welding from MIG to TIG, he has also adopted new technologies during his career.

Mennesker

How WeldEye welding management software sets the standard for welding traceability

How WeldEye welding management software sets the standard for welding traceability

Welding traceability is becoming an increasingly essential requirement in industries where safety, quality, and compliance are paramount.

Digitalisering

Cobot welding automates manual welding for superior efficiency and quality

Cobot welding automates manual welding for superior efficiency and quality

Cobot welding integrates collaborative robots (cobots) into welding processes to enhance productivity, quality, and safety.

Automatisering av sveising

Kemppi Minarc T 223 ACDC: A professional welder's hands-on test

Kemppi Minarc T 223 ACDC: A professional welder's hands-on test

When it comes to welding equipment, real-world performance matters. Three professional welders put the Kemppi Minarc T 223 ACDC to the test.

Manuell sveising, Mennesker

Abonner på nyhetsbrevet vårt og vær blant de første som får de siste nyhetene fra Kemppi.

Ved å abonnere godtar du å motta markedsførings-e-poster fra Kemppi.

Foregangsbedriften innen lysbuesveising

Kemppi er designleder i sveiseindustrien. Vi er forpliktet til å øke kvaliteten og produktiviteten til sveiseren ved kontinuerlig utvikling av lysbuen og ved å arbeide for en grønnere og mer likeverdig verden. Kemppi leverer bærekraftige produkter, digitale løsninger og tjenester til fagfolk fra industrielle sveisebedrifter til enkeltentreprenører. Brukervennligheten og påliteligheten til produktene våre er vårt ledende prinsipp. Vi opererer med et svært dyktig partnernettverk som dekker over 70 land for å gjøre sin ekspertise lokalt tilgjengelig. Kemppi har hovedkontor i Lahti, Finland, og sysselsetter over 650 fagfolk i 16 land og har en omsetning på 209 MEUR.

Kemppi – Designed for welders

Copyright © 2025 Kemppi Oy