Svejsningens ABC
Understanding and preventing common welding defects
15. februar 2024
Welding demands precision, but even skilled welders can encounter defects. Understanding common welding issues is critical to ensure high-quality results. Here are some frequent welding defects and how to avoid them.
Susanna Norja
Susanna Norja
Susanna Norja
Editor-in-chief of the Kemppi blog, content producer, and Social Media Manager at Kemppi until March 2024.
Flere blogindlæg
What Shielding Gas for TIG Welding?
How to choose the right shielding gas for TIG welding? Is there a gas suitable for any material that can be TIG welded?
Manuel svejsning
MIG/MAG welding arc types
In MIG/MAG welding, the mode of material transfer between the filler wire and the weld pool changes in line with the welding current.
Svejsningens ABC
Choosing the right gas nozzle length for MIG (GMAW) welding
Gas nozzle length is an important feature in a MIG welding torch because nozzle length has an effect in contact tip heat load, contact tip spatter protection and welding current.
Svejsningens ABC
Kemppi's advanced welding processes: MIG/MAG welding
One of the most important elements in developing welding equipment has long been improving welding processes and creating new process variations. Modern measurement and arc control methods have made a wide range of variations in the arc welding process possible. These advanced welding processes significantly improve welding production efficiency and weld quality. This article presents the special processes and operations developed by Kemppi for MIG/MAG welding.
Svejsningens ABC, Manuel svejsning
Hvordan WeldEye-welding management software sætter standarden for sporbarhed af svejsning
Sporbarhed af svejsning bliver et stadig vigtigere krav i industrier, hvor sikkerhed, kvalitet og overholdelse er altafgørende.
Digitalisering
Cobot welding automates manual welding for superior efficiency and quality
Cobot welding integrates collaborative robots (cobots) into welding processes to enhance productivity, quality, and safety.
Automatisering af svejsning
