Designed for welders

Energy-efficiency in welding 🔋👨‍🏭 With Kemppi’s energy-efficient welding machines, advanced welding processes, and WeldEye welding management software, you can reduce electricity consumption. Technologies like Reduced Gap Technology (RGT), WiseSteel, and WiseRoot+ reduce rework, filler material use, and arc time, enabling fewer weld passes, more stable processes, and lower energy and material consumption. Benefits of Reduced Gap Technology: • Less weld passes needed • 38% saving on arc time • 25% less filler material Benefits of WiseSteel: • 30% reduced labor costs • 30% reduction in grinding costs compared to standard MIG Welding • 25% savings in straightening costs Benefits of WiseRoot+: • Up to 80% more productivity • Up to 50% lower labor costs per welded meter • Up to 50% savings in filler material through reduced groove angles Kemppi’s welding machines are designed for high efficiency and precise power control to reduce unnecessary energy loss. System-level efficiency is just as important, which is why selecting the correct welding cable size and length helps minimize resistance and power loss during welding. Tie it all together by using WeldEye for data-driven monitoring. By tracking energy use, material consumption, and production performance, WeldEye helps you identify saving opportunities and achieve measurable reductions in energy use, waste, and emissions, especially during the use phase, where impact is greatest. …more

Looking to reduce energy consumption without compromising weld quality? 🔋👨‍🏭 With Kemppi’s energy-efficient welding machines, smart welding processes, and WeldEye welding management software, energy efficiency becomes part of everyday welding. When energy-efficient machines and correctly selected welding cables are combined with technologies such as Reduced Gap Technology (RGT) and advanced welding processes like WiseSteel and WiseRoot+, rework, filler material use, and arc time can be significantly reduced. From an energy perspective, this means lower energy consumption and less material waste. Benefits of Reduced Gap Technology: • Less weld passes needed • 38% saving on arc time • 25% less filler material Benefits of WiseSteel: • 30% reduced labor costs • 30% reduction in grinding costs compared to standard MIG Welding • 25% savings in straightening costs Benefits of WiseRoot+: • Up to 80% more productivity • Up to 50% lower labor costs per welded meter • Up to 50% savings in filler material through reduced groove angles Then tie it all together with process-optimizing software like WeldEye. That allows you to track energy use, material consumption, and production performance. It helps you identify saving opportunities and achieve measurable reductions in energy use, waste, and emissions, especially during the use phase, where impact is greatest. #Kemppi #KemppiWelding #EneryEfficiencyInWelding #EnergyEfficientWelding

How often should you check and replace your welding safety equipment? 🧑‍🏭 Change weekly: ➤ Clear protection plates ➤ Pre-filters Change monthly: ➤ Grinding visor plates ➤ Sweatbands ➤ Particle filters Change every 3 months: ➤ Fabric face seals ➤ Safety plates Change when needed: ➤ Breathing tubes and covers ➤ Filter covers ➤ Gas filters If your safety equipment is worn out 👉Explore Kemppi’s welding safety gear. #Kemppi #KemppiSafety #WeldingSafety

What is the typical replacement frequency for welding safety equipment? 🧑‍🏭 Change weekly: ➤ Clear protection plates ➤ Pre-filters Change monthly: ➤ Grinding visor plates ➤ Sweatbands ➤ Particle filters Change every 3 months: ➤ Fabric face seals ➤ Safety plates Change only if damaged or leaking: ➤ Breathing tubes and covers ➤ Filter covers Change as needed: ➤ Gas filters Changes in odour may indicate end of filter life, which depends on local contamination levels. Note! Regular reviews help ensure welding safety equipment continues to perform as intended. If it’s time for an update, explore Kemppi’s welding safety solutions designed to meet today’s standards: …more