Sveise-ABC
How to use a welding particle filter
24. mars 2024
Learn about the particulate filter in your welding respirator
Kemppi marketing
WHAT IS A WELDING PARTICLE FILTER?
A particulate filter is responsible for capturing airborne particles and helping maintain positive breathing pressure as air moves through a welding respirator.
It sits inside the filter unit alongside a prefilter, a gas filter, or an optional odor filter. To increase welding safety, using a fresh particle filter is strongly recommended.
Filter cover
Spark arrester
Pre-filter
Particle filter
Odor filter: Removes unpleasant odors. Optional accessory. Do not use if a gas filter is present
Gas filter: Removes gases and vapors
WHEN SHOULD A PARTICLE FILTER BE CHANGED?
In a typical industrial work environment, a welding particle filter should be changed once a month. However, if the working conditions are extremely dirty, Kemppi recommends changing the particulate filter in the respirator after every work shift.
Do not wait for the 'change filter' alarm on a welding respirator. This warning indicates that the performance of your welding particle filter is already seriously compromised.
The peace of mind and long-term health benefits of breathing safe air far outweigh the relatively small cost of changing your particle filters regularly.
THREE REASONS TO CHANGE YOUR PARTICLE FILTERS
1. Improve welding safety
Changing particle filters regularly ensures that the respirator delivers fresh air into the helmet for long-term welding safety and a better work experience.
2. Optimize respirator performance
A clogged particulate filter changes the back pressure in a welding respirator and forces the mechanical parts inside to wear out faster than normal.
3. Increase productivity
A fresh welding particle filter maintains efficient airflow and prevents excessive fan use that hurts productivity by draining the battery faster.
HOW DO YOU CHANGE A WELDING PARTICLE FILTER FOR KEMPPI PFU210E
Never attempt to clean a particulate filter. Blowing pressurized air into a particle filter can degrade its performance and potentially damage your welding respirator.
CHANGING WELDING RESPIRATOR FILTERS
Press the 'open' button to remove the filter unit cover
Check the condition of all filters (sometimes just the prefilter is dirty)
Remove clogged filters
Place the new filter in the correct place (make sure it fits tightly)
Attach the blower unit cover
Carefully push the hinged side into place
Using a welding particle filter correctly improves welding safety while also maximizing the performance and effective lifespan of a welding respirator.
Kemppi marketing
Kemppi marketing
Kemppi marketing aims to evoke discussion on the transformation of modern welding and bring you the latest stories from within the global welding industry, told by true experts in their respective fields.
Relaterte produkter
Produktfamilie
Gamma GTH3 åndedrettsvern oppfyller den strengeste EU-klassifikasjonen for pusteluft (TH3), som beskytter deg mot 99,8 % av luftbårne avgasser og partikler. Tilgjengelig med batteridrevne filterenheter og modeller med regulert trykkluft.
Produktfamilie
Zeta Fresh Air er et komplett åndedrettsvernsystem som består av en lett sveise- og kuttemaske og et sertifisert Kemppi-åndedrettsvern.
Produktfamilie
Zeta Fresh Air G er et komplett åndedrettsvernsystem som består av en velbalansert slipemaske med stort visir og et sertifisert Kemppi-åndedrettsvern.
Flere blogginnlegg
Sveisesikkerhet og risikoer ved sveising
Grunnen til at sikkerheten ved sveising er viktig, og hvordan du kan unngå de vanligste sveiserisikoene
Sveise-ABC
MIG/MAG-sveising
MIG-sveising – bruksområder, utstyr og teknikker
Sveise-ABC
Elektrodesveising
Bruksområder, utstyr, elektroder og teknikker for elektrodesveising
Sveise-ABC
How Rapid Welding and Kemppi Built a Partnership That Lasts
Rapid Welding has worked with Kemppi since the company opened in 1990. Co-founder and Managing Director Roy Edwards highlighted the principles behind that 36-year partnership, from choosing the right welding solution and supporting equipment throughout its life to addressing the skills shortage and finding the right place for automation and laser welding.
Automatisering av sveising, Manuell sveising, Sveise-ABC
Safety that keeps up with welders' challenges and changing risks
Welding safety has become increasingly demanding. The hazards at the arc remain constant, but modern working conditions mean exposure can accumulate over longer shifts and in tighter indoor spaces. As a result, welding PPE needs to be treated as both protection for the welder and proof of compliance. At Kemppi, welding safety PPE is designed and validated in practice through clear requirements, welder-led feedback, and verified compliance with EU PPE Regulation 2016/425, CE marking processes, and relevant EN standards.
Sikkerhet, Sveise-ABC
Eurosatory 2026 And the Future of Defence Manufacturing
Eurosatory 2026 highlighted a clear shift in modern defence manufacturing. While defence systems are becoming more digital, networked, and autonomous, their foundation remains physical. From armoured vehicles and artillery to industrial resilience, welding quality, steel structures, and production discipline remain paramount to defence readiness.
Digitalisering, Innovasjon
