Innovatie
WiseSteel – Quality and Productivity for MAG Welding of Structural Steel
5 september 2021
Welding equipment faces raised expectations due to more demanding base materials. In the welding of stronger steel grades, Kemppi has optimized arc control as a practical solution. WiseSteel is a MAG welding process developed by Kemppi for welding structural steel. The process can reduce the risk of welding defects at high welding speeds. It also enables the use of the low heat input required for stronger steel grades.
Jani Kumpulainen
Jani Kumpulainen
Jani Kumpulainen
Welding Technology Manager at Kemppi Oy. International Welding Engineer (IWE) and Inspector (IWI-C) who has over 10 years of experience as a welding expert in welding process development, welding coordination of pressure vessels and international sales. Interested in understanding the whole welding industry including welding processes, weldable materials, and welding quality standards.
Gerelateerde producten
Productfamilie
Een lasfunctie die speciaal is ontwikkeld om de uitdagingen van het globulaire overgangsgebied aan te pakken. WiseSteel combineert kortsluitboogovergangen met druppelovergangen, wat resulteert in hoogwaardige lassen met een regelmatig en gelijkmatig vissenschubpatroon.
Productfamilie
360-graden modulair multiproceslasapparaat richt zich primair op hoogwaardig MIG/MAG-lassen. X5 FastMig biedt instellingsopties voor handmatig, synergisch en pulslassen. Een breed assortiment accessoires biedt lasproductieprocessen flexibiliteit en efficiëntie.
Meer blogberichten
Calculation of heat input in MIG/MAG welding
The new welding procedure test standard, EN-ISO 15614-1:2017, provides recommendations for the measurement and calculation of heat input. In concrete terms, what does this mean for MIG/MAG welding? And how can workshops carry out these calculations in practice?
ABC van het lassen
How Ready Are We for Green Steel?
The steel industry is without a doubt one of the highest CO2-emitting industries and its effects on the environment raise concerns. High-strength and “green” steel can offer both environmental and financial benefits for manufacturers that contribute to sustainable development. But how ready are we to commit to it?
Innovatie
Behind the scenes: The development of X8 MIG Welder
Creating a new product for industrial users is both a long journey and exciting adventure. In his LinkedIn Pulse post, Kemppi's User Experience Manager Jussi Kapanen recalls the beginning of an ambitious R&D project, when the team was tasked with the target of creating the best MIG welding system in the world, to be loved by users in 2017.
Innovatie
Kemppi's advanced welding processes: MIG/MAG welding
One of the most important elements in developing welding equipment has long been improving welding processes and creating new process variations. Modern measurement and arc control methods have made a wide range of variations in the arc welding process possible. These advanced welding processes significantly improve welding production efficiency and weld quality. This article presents the special processes and operations developed by Kemppi for MIG/MAG welding.
ABC van het lassen, Handmatig lassen
How WeldEye welding management software sets the standard for welding traceability
Welding traceability is becoming an increasingly essential requirement in industries where safety, quality, and compliance are paramount.
Digitalisering
Cobot welding automates manual welding for superior efficiency and quality
Cobot welding integrates collaborative robots (cobots) into welding processes to enhance productivity, quality, and safety.
Lasautomatisering
