Safety
There is something in the air – invest in welder's safety
April 15, 2021
You’ve probably seen pictures of contaminants? Those tiny little particles that can't be seen with the eye but look horrifying through the microscope lens. If you could actually see them floating around you, would you not use the maximum protection available?
Janne Karppinen
It is a well-known fact that welding generates metal particulates and gases such as ozone, nitrogen oxides, and carbon monoxide. The types of fumes and their amount depend on the welding process and the type of material at hand. Welding metals, solvents, flux, plastic or paint all produce different gases and some of the fumes are visible to the eye, but many invisible and real. So, I'm sure you'd agree that when it comes to your health and safety, you shouldn't leave anything to chance. Use solutions that guarantee your well-being.
When it comes to your health and safety, you shouldn't leave anything to chance. Use solutions that guarantee your well-being.
As with the other occupational hazards of welding, welders can minimize the risk of inhaling welding fumes and airborne contaminants by using approved Personal Protective Equipment (PPE) which protects against prolonged exposure to airborne welding and grinding fumes. It shouldn't be ignored as exposure to airborne contamination for lengthy periods may result in long-term health issues, including cancer.
The best way to protect yourself is with an appropriate respirator
The good news is that the best protection is already available for the welder's safety. The welders wearing a welding helmet equipped with an appropriate air ventilation system can in fact efficiently protect themselves from toxic fumes and airborne contaminants. Masks supplied with proper respirators offer a higher protection level and allow you to rest assured you can work safely.
In case you didn't know, respirator systems are officially graded by the protection level they offer e.g. the level to which they exclude the contaminated air in the work environment. This classification rates the efficiency of the filtering system and the total measured combined leakage rating of the respirator system and is being called the Total Inward Leakage (TIL) performance rating.
Kemppi’s Gamma GTH3 welding and grinding respirator models, including the new Gamma GTH3 RFA are certified to a maximum allowable inward leakage of 0.2 %, which means they protect the welders from 99.8% of airborne fumes and particulates. Therefore, they have an important role in minimizing the risk of lung diseases but also enhancing the welder's work performance as clean breathing air lowers fatigue.
Respirators provide cool and clean breathing air
The Gamma GTH3 welding and grinding respirator models provide cool and clean breathing air, from either a PFU 210e battery-powered filter unit offering optimal freedom of movement around the workspace or a supplied breathing air solution where the airflow is regulated from the RSA 230.
A respirator helmet is comfortable and lightweight
Good protection is obviously visible, but when adjusted correctly, a respirator helmet is comfortable and lightweight. The lightweight structure and fabric face seal ensure comfort for lengthy periods. The ComFlex headband offers comfort and flexibility for the perfect fit to your individual head shape and preferences. Even distribution of the suspended weight lowers pressure to sensitive areas of the head, minimizing fatigue and headgear-related headaches.
A proper respirator helmet improves visibility
It in fact improves visibility significantly. The GapView switch sets a clear view beneath the welding visor providing a narrow 15 mm gap and clear vision of the working area. It is ideal for workpiece setting and tacking prior to welding. On the other hand, LiFE+ Color welding optics are developed to improve work efficiency, reduce eye fatigue and protect sight. For fine and low current welding applications, a magnifying lens can be easily fitted, providing a more detailed view of the workpiece.
A large 198 cm2 visor offers a wide 170-degree field of view and protects the face from hits equivalent to six joules of energy. You can also select a hard-coated visor that withstands more wear and tear, or a yellow-toned visor that enhances contrast when working in low light.
Certifiably reliable welding and grinding respirators are available
The Gamma GTH3 respirator models are certified with a maximum inward leakage level of TH3 which means a maximum of 0.2 % inward leakage when connected to the PFU 210e filter unit. The PFU 210e filter unit also offers the option of a combined particle and gas filtration set. The powered filter unit represents the highest level of filtration performance.
Welder's safety is the hot potato of the welding industry, and for a reason. Therefore, it is good to remember that you are more special than your work and you shouldn't take any needless risks. Safety and comfort belong to every welder's working life – yours included!
Janne Karppinen
Janne Karppinen
Related products
Product family
Gamma GTH3 respirator models meet the highest EU classification for respiratory performance (TH3) protecting you from 99.8 % of airborne fumes and particulate. Available with battery powered filter units and regulated supplied air models.
Product family
Zeta Fresh Air is a complete respiratory protection system that includes a lightweight welding and cutting helmet and a certified Kemppi respirator.
Product family
Zeta Fresh Air G is a complete respiratory protection system that includes a well-balanced grinding helmet with a large visor and a certified Kemppi respirator.
More blog posts
Ensure the mandatory site safety
Is it mandatory to wear the hard hat and to provide the site worker with adequate eye protection? In most cases yes. How do you then solve the work site safety if you weld for a short period in between the other work tasks? Read further, we have the solution for you!
Safety
Zeta welding helmets light up your day
Good ergonomics are essential for anyone who is welding and grinding, so when talking about occupational safety, welding ergonomics shouldn´t be ignored. Let´s talk about that and about a stand-alone welding helmet with excellent ergonomic and visibility features. It´s called Zeta.
Safety
A welder's best friend
What’s the most important tool you own? It’s not a wrench, or a screwdriver – it’s your hands! A wrench performs a few tasks really well, but your hands are versatile, precise and adaptable. They can do anything, but they are also vulnerable.
Safety
How Rapid Welding and Kemppi Built a Partnership That Lasts
Rapid Welding has worked with Kemppi since the company opened in 1990. Co-founder and Managing Director Roy Edwards highlighted the principles behind that 36-year partnership, from choosing the right welding solution and supporting equipment throughout its life to addressing the skills shortage and finding the right place for automation and laser welding.
Welding automation, Manual welding, Welding ABC
Safety that keeps up with welders' challenges and changing risks
Welding safety has become increasingly demanding. The hazards at the arc remain constant, but modern working conditions mean exposure can accumulate over longer shifts and in tighter indoor spaces. As a result, welding PPE needs to be treated as both protection for the welder and proof of compliance. At Kemppi, welding safety PPE is designed and validated in practice through clear requirements, welder-led feedback, and verified compliance with EU PPE Regulation 2016/425, CE marking processes, and relevant EN standards.
Safety, Welding ABC
Eurosatory 2026 And the Future of Defence Manufacturing
Eurosatory 2026 highlighted a clear shift in modern defence manufacturing. While defence systems are becoming more digital, networked, and autonomous, their foundation remains physical. From armoured vehicles and artillery to industrial resilience, welding quality, steel structures, and production discipline remain paramount to defence readiness.
Digitalization, Innovation
