Welding in hot conditions in Saudi Arabia

Manual welding

Welding in hot conditions in Saudi Arabia

August 4, 2019

Pipelines are built in many different places, from freezing cold Siberia to the plains of Central Asia and the scorching deserts in the Arabian peninsula and Africa. Every year, thousands of kilometers of pipelines are installed and maintained in extreme conditions that are incomparable to the steady, stable temperature conditions of the workshop. Pipelines may be installed and repaired at temperatures below -20°C or above +50°C.

Jani Kumpulainen

When welding is done outdoors, efforts are taken to provide protection using structures such as tents and portable welding cubicles, which are lifted into place to protect the welding site. These solutions protect the weld from snow, rain, and wind, and the welders are also provided with some protection from the weather while they are welding. However, tents are no help in the searing heat, which can reach temperatures of up to +50°C in Saudi Arabia.

Although the weather can cause difficulties, welding must always meet precise quality requirements. Welding is done in accordance with welding procedure specifications, which have been approved using prior welding procedure qualification. Highly demanding welding work is done in extreme conditions, which may impose requirements on monitoring, as well as on the functionality of the welding equipment.

Building the world's largest oil refinery in Saudi Arabia

Saudi Aramco is the world's largest oil and energy industry company. It is owned by the Saudi Arabian state, and its headquarters are in Dhahran, near the east coast of the country. Now the company is building the world's largest oil refinery in Jizan.

The pipelines are primarily being welded with TIG and MMA welding. The root passes and thin-walled pipes are being welded with TIG welding, and all of the filler passes are being done with MMA welding. Kemppi has supplied almost 1,000 MinarcTig Evo 200 devices for the TIG welding carried out by subcontractors on the project, as well as MasterTig MLS 4000 devices for TIG welding and Master S 400 devices for MMA welding.

The construction site of the world's largest oil refinery in Jizan, Saudi Arabia.

Temperatures in Jizan are over +30°C all year round, and they can be as high as +50°C during the summer. The international IEC 60974-1 standard requires manufacturers of welding machines to measure and state the duty cycles of welding machines at +40°C. The same standard also requires welding machines to be able to withstand storage temperatures up to +55°C. Experience in Saudi Arabia has also shown that Kemppi's power sources function flawlessly in hot conditions.

Welders are put under greater strain in hot conditions. Welders' work can be made easier by using techniques such as mechanized MIG/MAG or TIG orbital welding. However, the problem is that new methods are slow and expensive to introduce. Saudi Aramco requires all welding procedure specifications to meet ISO and ASME requirements, as well as Saudi Aramco's own requirements.

Welding an 85-inch water pipeline in +40° conditions

In Riyadh, the capital of Saudi Arabia, a pipeline is being welded for the city's water supply. The conditions in Riyadh are also hot – during the summer, the average temperature is usually +40°C. The pipeline is being built from steel pipes with a diameter of 85 inches and a wall thickness of 15–20 mm (Figure 1). The sections are currently being welded with MMA welding (Figure 2).

However, the company carrying out the welding would like to use more productive methods. Kemppi presented MAG orbital welding to them (Figure 3). The equipment was a FastMig X 450 power source equipped with two WFX 300 P wire feeders and an A5 MIG Orbital System 1500 (Figure 4). The root pass was welded using the WiseRoot+ process with solid wire, and the filler passes were welded with rutile wire in spray arc. The change-over from welding the root pass to welding the filler pass was quick because one of the wire feeders had solid wire and the other had rutile wire.

Figure 1. 85-inch water pipes in Riyadh, Saudi Arabia.

Figure 1. 85-inch water pipes in Riyadh, Saudi Arabia.

Figure 2. MMA welding of butt joints on the pipe.

Figure 2. MMA welding of butt joints on the pipe.

Figure 3. MAG orbital welding of butt joints on the pipe.

Figure 3. MAG orbital welding of butt joints on the pipe.

Figure 4. Kemppi's FastMig X and A5 MIG Orbital System 1500.

Figure 4. Kemppi's FastMig X and A5 MIG Orbital System 1500.

To summarize, welding in hot conditions is not normally a problem for the welding equipment if it has been manufactured in line with international quality standards. The IEC 60974-1 standard requires the duty cycle of power sources to be tested at a temperature of +40°C, and the power source must be able to withstand being stored at +55°C.

However, welders are put under greater strain when they work in hot conditions. Switching from manual welding to mechanized welding whenever possible is one way of easing the work of welders while improving quality and productivity. However, this is not always possible due to the precision of prefabrication. On the other hand, scheduling and budgetary constraints may not permit the use of new methods on every project.

Jani Kumpulainen
Author

Jani Kumpulainen

Welding Technology Manager at Kemppi Oy. International Welding Engineer (IWE) and Inspector (IWI-C) who has over 10 years of experience as a welding expert in welding process development, welding coordination of pressure vessels and international sales. Interested in understanding the whole welding industry including welding processes, weldable materials, and welding quality standards.

More blog posts

Welding in arctic conditions

Welding in arctic conditions

Today, Arctic areas are attracting much attention due to the large oil and natural gas deposits located there. As much as 13% of the Earth's unexploited oil reserves and 30% of natural gas reserves may be located in Arctic areas. The energy industry's largest projects to build gas and oil distribution networks are essentially based on steel construction and welding technology.

Manual welding

Up to 38 % savings with Reduced Gap Technology

Up to 38 % savings with Reduced Gap Technology

The groove angle has a direct impact on the efficiency and productivity of welding heavy metal structures. Kemppi's new solution, Reduced Gap Technology (RGT) changes the understanding of narrow gap welding. The new technology challenges conventional joint design principles.

Innovation

Wise pipe welding at IIW 2015

Wise pipe welding at IIW 2015

Once a year, all welding professionals in the world gather together to share their expertise and insights on the welding industry. The 68th IIW Annual Assembly and International Conference is currently in motion in Helsinki, Finland.

Manual welding

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

People

How to choose the MIG/MAG welding torch

How to choose the MIG/MAG welding torch

MIG/MAG welding is one of the most common and versatile welding processes. It is used for various applications, such as automotive, construction, fabrication, and maintenance. However, choosing a suitable welding torch for your job is essential to achieve optimal results.

Manual welding, Welding ABC

New technologies contribute to the development of heavy industry

New technologies contribute to the development of heavy industry

Kemppi is actively developing the industry and offering its know-how for multidisciplinary innovation projects. With the means of cooperation, new ways of working are created, and operational processes are enhanced and refined.

Digitalization, Innovation

Subscribe to our newsletter and be among the first to know the latest from Kemppi.

By subscribing, you agree to receive marketing emails from Kemppi.

The forerunners of arc welding

Kemppi is the design leader of the arc welding industry. Kemppi is the design leader in the arc welding industry. We are committed to boosting the quality and productivity of welding by continuous development of the welding arc and by working for a greener and more equal world. Kemppi supplies sustainable products, digital solutions, and services for professionals from industrial welding companies to single contractors. The usability and reliability of our products is our guiding principle. We operate with a highly skilled partner network covering over 70 countries to make its expertise locally available. Headquartered in Lahti, Finland, Kemppi employs over 650 professionals in 16 countries and has a revenue of 209 MEUR in 2023.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy