- Home
- Master M 205 GM AU
Master M 205 GM AU
MSM205GMAU
A portable multiprocess welder for Australian markets. The power source provides 200 A with a 40% duty cycle. Manual, synergic, and pulse MIG welding options available, along with stick and DC TIG welding options. Intelligent welding parameter settin...
Master M 205 GM AU — Technical data
| Description | Value |
|---|---|
| Mains connection voltage | 220...240 V ±10 % |
| Mains connection voltage (MV low range) | 110...130 V ±10 % |
| Mains connection phases | 1~50/60 Hz |
| Mains connection cable type | H07RN-F |
| Mains connection cable size | 2.5 mm² |
| Maximum supply current (@MV low range) [I1max] | 28 ... 23 A |
| Rated maximum input power [S1max] | 6 kVA |
| Mains fuse | 16 A |
| Mains fuse (@MV low range) | 16 A |
| Idle state power consumption [P1idle] | 17 W |
| No-load state power consumption (MMA), power save | 17 W |
| No-load state power consumption (MMA), fans ON | 120 W |
| Output, duty cycle % at rated max. current, MIG | 40 % |
| Output at +40 °C, rated max current, MIG | 200 A |
| Output at +40 °C, 60% MIG | 170 A |
| Output at +40 °C, 100% MIG | 140 A |
| Output, duty cycle % at rated max. current, MIG (@MV low range) | 30 % |
| Output at +40 °C, rated max current, MIG (@MV low range) | 120 A |
| Output at +40 °C, 60% MIG (@MV low range) | 95 A |
| Output at +40 °C, 100% MIG (@MV low range) | 75 A |
| Output range, MIG | 15 A / 10 V ... 200 A / 28 V |
| Output range, TIG | 15 A / 1 V ... 200 A / 28 V |
| Output range, MMA | 15 A / 10 V ... 175 A / 31 V |
| Output range, MIG (@MV low range) | 15 A / 10 V ... 120 A / 21 V |
| Output range, TIG (@MV low range) | 15 A / 1 V ... 120 A / 21 V |
| Output range, MMA (@MV low range) | 15 A / 10 V ... 100 A / 24 V |
| Voltage adjustment range, MIG | 10 ... 32 V |
| VRD voltage | 24 V |
| Power factor at rated maximum current [λ] | 0.99 |
| Efficiency at rated maximum current [η] | 84 % |
| EMC class | A |
| Voltage supply for cooling unit | 220...240 V, 24 V |
| Welding connection type | Euro |
| Wire feed mechanism | Single-motor, 2-roll |
| Diameter of feed rolls | 32 mm |
| Filler wire diameter, Fe | 0.8 ... 1 mm |
| Filler wire diameter, Ss | 0.8 ... 1 mm |
| Filler wire diameter, Al | 0.8 ... 1.2 mm |
| Wire feed speed | 0.5 ... 25 m/min |
| Maximum wire spool weight | 5 kg |
| Maximum wire spool diameter | 200 mm |
| Maximum shielding gas pressure | 0.5 MPa |
| Control panel, model | Custom LCD |
| Control panel, display | Color LCD |
| Control panel, controls | 2 control knobs, Push buttons |
| Control panel, type of installation | Built-in |
| Control panel, input voltage (DC) | 12 V |
| Operating temperature | -20 ... 40 °C |
| Storage temperature | -40 ... 60 °C |
| Recommended minimum generator power [Sgen] | 15 kVA |
| LED battery type and voltage | SAMSUNG SDI (INR18650-26J; 3,6 V; 2600 mAh); LG CHEM (ICR18650HE4; 3,6 V; 2500 mAh) |
| Degree of protection (fully installed) | IP23S |
| External dimensions, length | 520 mm |
| External dimensions, width | 250 mm |
| External dimensions, height | 379 mm |
| Weight without accessories | 16.2 kg |
| Standards | IEC 60974-1, -10 |
