- Home
- X3 Wire Feeder HD300 Rotameter
X3 Wire Feeder HD300 Rotameter
X3HD300R
A side-loading wire feeder for all X3 FastMig power sources with a digital LCD display. The wire feeder features a 4-wheel wire feed mechanism, a safe-lift design, and an integrated storage for parts in the side door. The robust plastic case with dua...
X3 Wire Feeder HD300 Rotameter — Technical data
| Description | Value |
|---|---|
| Supply voltage | 48 V |
| Supply current at maximum load | 6.3 A |
| Idle power | 6 W |
| Welding current 60% | 450 A |
| Welding current 100% | 380 A |
| EMC class | A |
| Welding connection type | Euro |
| Wire feed mechanism | 4-roll, Single-motor |
| Diameter of feed rolls | 32 mm |
| Filler wire diameter, Fe | 0.8 ... 2 mm |
| Filler wire diameter, Ss | 0.8 ... 2 mm |
| Filler wire diameter, MC/FC | 0.8 ... 2.4 mm |
| Filler wire diameter, Al | 0.8 ... 2.4 mm |
| Wire feed speed | 0.5 ... 25 m/min |
| Maximum wire spool weight | 20 kg |
| Maximum wire spool diameter | 300 mm |
| Maximum shielding gas pressure | 0.5 MPa |
| Control panel, display | LCD |
| Control panel, controls | 2 control knobs, Push buttons |
| Control panel, type of installation | Built-in |
| Wired communication type | CAN bus |
| Operating temperature | -20 ... 40 °C |
| Storage temperature | -40 ... 60 °C |
| Degree of protection (fully installed) | IP23 |
| External dimensions, length | 670 mm |
| External dimensions, width | 240 mm |
| External dimensions, height | 465 mm |
| Weight without accessories | 14.4 kg |
| Standards | IEC 60974-5, 10 |
