How fresh is your air?

Safety

How fresh is your air?

November 7, 2022

Things move fast in the welding industry and it's easy to forget about changing your particle filters. But sometimes small things can make a big difference. Let's take a closer look at three reasons why changing particle filters regularly is very important.

Roger Rasmussen

1. Safe breathing

Perhaps the most obvious reason to change your particle filters is to breathe safely on the job. Maintaining a steady flow of fresh air is a key part of welding safety – fresh air makes welding more enjoyable, while improving clarity and focus.

If we look at it another way, a clogged or dirty filter can have serious implications for welding safety by compromising the performance of your fresh air system. While the long-term consequences of breathing small airborne particles is still debated by many, the science behind the effects of breathing in dust particles is remarkably clear.

Dust particles smaller than 10 μm can get trapped in the nose, mouth and upper respiratory tract, contributing to respiratory disorders like asthma, tracheitis, pneumonia, allergic rhinitis and silicosis. Fine dust particles can also penetrate the lower respiratory tract and contribute to cardiovascular disorders by entering the bloodstream.

­Source: WMO article on atmospheric dust.

The peace of mind and long-term health benefits of breathing safe air far outweigh the relatively small cost of changing your particle filters once a month.

Welding safety infograph

Read more about welding safety

2. Optimal equipment performance

Many people wait for the 'change filter' alarm on their respirator. But did you know that the alarm is not a polite reminder? It's actually an indication that the filter is well beyond optimal performance. Think of it like a fault code on your car, when the light comes on the dashboard, the performance of the car is already affected.

Image of a new, clean filter and a used, dirty filter.

How fresh is your air? Change the filter regularly.

Using a dirty filter affects the positive pressure generated by your respirator. Positive pressure is needed to keep contaminated air out, while ensuring a steady flow of fresh air into the helmet. Using a respirator without positive pressure places unnecessary stress and load on the mechanical parts of your breathing system. In the long run, this can lead to unscheduled repairs and higher maintenance costs.

Changing filters once a month is an important part of good maintenance hygiene. It is an easy way to ensure trouble free operation of your Kemppi fresh air system.

Increased productivity

Being interrupted by an equipment issue is an unwelcome distraction. Experts know that maintaining safety equipment is critical to creating a work environment where you can devote your full attention to the task. But with a dirty particle filter, there is a real risk that you won't make it through a full day without charging your respirator.

A dirty or clogged filter restricts air flow and forces the fan to compensate by spinning faster than normal. The increased load on the fan can significantly reduce the battery life of your respirator and force you to charge it sooner.

A chart of respirator battery lifetime regarding filter condition

The battery lifetime for a standard duty (SD) battery and a heavy duty (HD) battery.

Maintaining proper air flow increases productivity by ensuring that a welder is free to do their job without worrying about being interrupted by a low battery level.

We want to make it easy to change particle filters – See our free filter pack offer now

Watch also the evergreen video about how to choose a suitable filter for the welding respiratory system.

Roger Rasmussen
Author

Roger Rasmussen

Vice President, Torches, Consumables and Safety at Kemppi Oy

More blog posts

There is something in the air – invest in welder's safety

There is something in the air – invest in welder's safety

You’ve probably seen pictures of contaminants? Those tiny little particles that can't be seen with the eye but look horrifying through the microscope lens. If you could actually see them floating around you, would you not use the maximum protection available?

Safety

Welding Fume Extraction Efficiently Reduces Occupational Health Risks

Welding Fume Extraction Efficiently Reduces Occupational Health Risks

Concerns over the risks of welder exposure to harmful welding fumes have initiated EU and national-level actions. The revised version of ISO standard 21904-3 defines the method for measuring the capture efficiency of welding fume extraction guns. Kemppi has conducted tests according to the new standard with Flexlite GF, a new fume-extracting MIG welding gun with convincing results.

Safety

Ensure the mandatory site safety

Ensure the mandatory site safety

Is it mandatory to wear the hard hat and to provide the site worker with adequate eye protection? In most cases yes. How do you then solve the work site safety if you weld for a short period in between the other work tasks? Read further, we have the solution for you!  

Safety

New Kemppi Robotics Team

New Kemppi Robotics Team

Achieving strategic goals and enhancing customer experience

People

How to choose the MIG/MAG welding torch

How to choose the MIG/MAG welding torch

MIG/MAG welding is one of the most common and versatile welding processes. It is used for various applications, such as automotive, construction, fabrication, and maintenance. However, choosing a suitable welding torch for your job is essential to achieve optimal results.

Manual welding, Welding ABC

New technologies contribute to the development of heavy industry

New technologies contribute to the development of heavy industry

Kemppi is actively developing the industry and offering its know-how for multidisciplinary innovation projects. With the means of cooperation, new ways of working are created, and operational processes are enhanced and refined.

Digitalization, Innovation

Subscribe to our newsletter and be among the first to know the latest from Kemppi.

By subscribing, you agree to receive marketing emails from Kemppi.

The forerunners of arc welding

Kemppi is the design leader of the arc welding industry. Kemppi is the design leader in the arc welding industry. We are committed to boosting the quality and productivity of welding by continuous development of the welding arc and by working for a greener and more equal world. Kemppi supplies sustainable products, digital solutions, and services for professionals from industrial welding companies to single contractors. The usability and reliability of our products is our guiding principle. We operate with a highly skilled partner network covering over 70 countries to make its expertise locally available. Headquartered in Lahti, Finland, Kemppi employs over 650 professionals in 16 countries and has a revenue of 209 MEUR in 2023.

Kemppi – Designed for welders

Copyright © 2024 Kemppi Oy