Gamma GTH3
Gamma GTH3 respirator models meet the highest EU classification for respiratory performance (TH3) protecting you from 99.8 % of airborne fumes and particulate. Available with battery powered filter units and regulated supplied air models.
- Home
- PPE / Safety
- Gamma GTH3
Safety for multiple processes
Designed for all arc welding, cutting, grinding, gouging and inspection processes.
Protection for your lungs
Respirator models meet the highest EU classification protecting you from 99.8 % of airborne fumes and particulate.
Comfort and usability
Models include optimum vision performance and unique usability features including Axis regulation and GapView function.
Top level personal protection for professional welders and fabricators
LED work lights
Gamma GTH3 XFA features 70 lumen LED work lights, reaching new levels of safety and comfort for low light working conditions and powered directly from the rechargeable PAPR battery. Works lights can be switched on and off from the helmet mounted remote control.
Related blogs
Expert insights: Choosing welding helmets and respiratory protection – prioritizing safety over cost
Selecting the right welding helmet and respiratory protection system is crucial for protecting welders in high-risk environments. While cost may factor into decisions, the need for effective, high-quality protection should always come first.
Welding safety, PPE, Welding mask, Welding respirator system
How to use a welding particle filter
Learn about the particulate filter in your welding respirator
Welding safety, Industrial welding
How fresh is your air?
Things move fast in the welding industry and it's easy to forget about changing your particle filters. But sometimes small things can make a big difference. Let's take a closer look at three reasons why changing particle filters regularly is very important.
Welding respirator system, Welding helmet, Welding mask, Welding safety, Work safety
There is something in the air – invest in welder's safety
You’ve probably seen pictures of contaminants? Those tiny little particles that can't be seen with the eye but look horrifying through the microscope lens. If you could actually see them floating around you, would you not use the maximum protection available?
PPE, Welding respirator system, Welding safety
Welding safety and welding hazards
Why welding safety is important and how to avoid the most common welding hazards
Welding safety, Arc welding, Welding helmet, Welding mask
How Rapid Welding and Kemppi Built a Partnership That Lasts
Rapid Welding has worked with Kemppi since the company opened in 1990. Co-founder and Managing Director Roy Edwards highlighted the principles behind that 36-year partnership, from choosing the right welding solution and supporting equipment throughout its life to addressing the skills shortage and finding the right place for automation and laser welding.
Cooperation, Partners
Safety that keeps up with welders' challenges and changing risks
Welding safety has become increasingly demanding. The hazards at the arc remain constant, but modern working conditions mean exposure can accumulate over longer shifts and in tighter indoor spaces. As a result, welding PPE needs to be treated as both protection for the welder and proof of compliance. At Kemppi, welding safety PPE is designed and validated in practice through clear requirements, welder-led feedback, and verified compliance with EU PPE Regulation 2016/425, CE marking processes, and relevant EN standards.
Welding safety, Work safety, Welding helmet
SA 60 Welding Filter — Technical data
| Description | Value |
|---|---|
| ADF view size (mm) | 102x60 |
| ADF inner protection plate size (mm) | 106.5 x 65.5 |
| ADF switching time | 0.1 ms |
| ADF light state | 4 |
| ADF shade range | 8/9-13 |
| ADF sensors | 2 |
| ADF shade lock | No |
| ADF UV/IR protection | At all times |
| ADF power supply | Battery, Solar cell |
| ADF battery type | 1 x CR2450 |
| ADF low battery indicator | Yes |
| ADF remote control | Yes |
| ADF Vision+ Color | Yes |
| ADF TIG rated | No |
| ADF classification | 1/1/1/2 |
| Grind mode | Yes |
XA 74 Welding Filter — Technical data
| Description | Value |
|---|---|
| ADF view size (mm) | 102x74 |
| ADF inner protection plate size (mm) | 106.5 x 74 |
| ADF switching time | 0.1 ms |
| ADF light state | 4 |
| ADF shade range | 8/9-13/14-15 |
| ADF sensors | 2 |
| ADF shade lock | No |
| ADF UV/IR protection | At all times |
| ADF power supply | Battery, Solar cell |
| ADF battery type | 1 x CR2450 |
| ADF low battery indicator | Yes |
| ADF remote control | Yes |
| ADF Vision+ Color | Yes |
| ADF TIG rated | No |
| ADF classification | 1/1/1/2 |
| Grind mode | Yes |
Gamma GTH3 SFA + RSA 230 — Technical data
| Description | Value |
|---|---|
| Welding filter type | SA 60 |
| ADF view size (mm) | 102x60 |
| ADF switching time | 0.1 ms |
| ADF light state | 4 |
| ADF shade range | 8/9-13 |
| ADF sensors | 2 |
| ADF UV/IR protection | At all times |
| ADF battery type | 1 x CR2450 |
| ADF remote control | Yes |
| ADF classification | 1/1/1/2 |
| LED light | No |
| Grind mode | Yes |
| Flip-up visor | Yes |
| Impact rate | EN 175 B |
| Hard hat | No |
| Interface for earmuffs | No |
| Operating temperature | -5 ... 55 °C |
| Storage temperature | -20 ... 50 °C |
| Recommended maximum humidity for use | 80 % |
| Materials | 100% cotton, ABS, PA, Padding foam plastic, PC, POM, PP |
| Weight without accessories | 1000 g |
| Manufacturer | Kemppi Oy |
| Standards | EN 175 B, EN 166 B, EN 397, EN 12941 TH3, EN 14594 3B, AS/NZS 1716 P2, AS/NZS 1337.1, AS/NZS 1338.1 |
| Type inspected by | NB. No 0196, 0200, 2834 |
| FA: Air supply / respirator unit | RSA 230 |
| FA: Air supply / respirator unit belt size | 125 cm |
| FA: Supply pressure hose length | 10 ... 30 m |
| FA: Required supply air pressure | 550 ... 600 kPa |
| FA: Minimum airflow | 160 l/min |
| FA: Maximum airflow | 400 l/min |
| FA: Weight, air supply / respirator unit | 1600 g |
| FA: Manufacturer, air supply / respirator unit | Kemppi Oy |
| Respiratory protection level | TH3 |
Gamma GTH3 XFA + PFU 210e — Technical data
| Description | Value |
|---|---|
| Welding filter type | XA 74 |
| ADF view size (mm) | 102x74 |
| ADF switching time | 0.1 ms |
| ADF light state | 4 |
| ADF shade range | 8/9-13/14-15 |
| ADF sensors | 2 |
| ADF UV/IR protection | At all times |
| ADF battery type | 1 x CR2450 |
| ADF remote control | Yes |
| ADF classification | 1/1/1/2 |
| LED light | Yes |
| Grind mode | Yes |
| Flip-up visor | Yes |
| Impact rate | EN 175 B |
| Hard hat | No |
| Interface for earmuffs | No |
| Operating temperature | -5 ... 55 °C |
| Storage temperature | -20 ... 50 °C |
| Recommended maximum humidity for use | 80 % |
| Materials | 100% cotton, ABS, PA, Padding foam plastic, PC, POM, PP |
| Weight without accessories | 1100 g |
| Manufacturer | Kemppi Oy |
| Standards | EN 175 B, EN 166 B, EN 397, EN 12941 TH3, EN 14594 3B, AS/NZS 1716 P2, AS/NZS 1337.1, AS/NZS 1338.1 |
| Type inspected by | NB. No 0196, 0200, 2834 |
| FA: Air supply / respirator unit | PFU 210e |
| FA: Air supply / respirator unit air filter | Prefilter, Particle filter Life+, Gas filter Life+ , Odor filter (optional) |
| FA: Air supply / respirator unit belt size | 125 cm |
| FA: Respirator unit battery charging connector type | PFU 210e battery charger |
| FA: Respirator unit battery type and voltage | SD: Li-ion 14.4 V, 3.2 Ah (46 Wh), HD: Li-ion 14.4 V, 6.4 Ah (92 Wh) |
| FA: Respirator unit battery life, average, with filters | SD: 7 h, HD: 9 h |
| FA: Minimum airflow | 160 l/min |
| FA: Maximum airflow | 210 l/min |
| FA: Weight, air supply / respirator unit | 2510 g |
| FA: Manufacturer, air supply / respirator unit | Kemppi Oy |
| Respiratory protection level | TH3 |
Gamma GTH3 SFA + PFU 210e — Technical data
| Description | Value |
|---|---|
| Welding filter type | SA 60 |
| ADF view size (mm) | 102x60 |
| ADF switching time | 0.1 ms |
| ADF light state | 4 |
| ADF shade range | 8/9-13 |
| ADF sensors | 2 |
| ADF UV/IR protection | At all times |
| ADF battery type | 1 x CR2450 |
| ADF remote control | Yes |
| ADF classification | 1/1/1/2 |
| LED light | No |
| Grind mode | Yes |
| Flip-up visor | Yes |
| Impact rate | EN 175 B |
| Hard hat | No |
| Interface for earmuffs | No |
| Operating temperature | -5 ... 55 °C |
| Storage temperature | -20 ... 50 °C |
| Recommended maximum humidity for use | 80 % |
| Materials | 100% cotton, ABS, PA, Padding foam plastic, PC, POM, PP |
| Weight without accessories | 1000 g |
| Manufacturer | Kemppi Oy |
| Standards | EN 175 B, EN 166 B, EN 397, EN 12941 TH3, EN 14594 3B, AS/NZS 1716 P2, AS/NZS 1337.1, AS/NZS 1338.1 |
| Type inspected by | NB. No 0196, 0200, 2834 |
| FA: Air supply / respirator unit | PFU 210e |
| FA: Air supply / respirator unit air filter | Prefilter, Particle filter Life+, Gas filter Life+ , Odor filter (optional) |
| FA: Air supply / respirator unit belt size | 125 cm |
| FA: Respirator unit battery charging connector type | PFU 210e battery charger |
| FA: Respirator unit battery type and voltage | SD: Li-ion 14.4 V, 3.2 Ah (46 Wh), HD: Li-ion 14.4 V, 6.4 Ah (92 Wh) |
| FA: Respirator unit battery life, average, with filters | SD: 7 h, HD: 9 h |
| FA: Minimum airflow | 160 l/min |
| FA: Maximum airflow | 210 l/min |
| FA: Weight, air supply / respirator unit | 2510 g |
| FA: Manufacturer, air supply / respirator unit | Kemppi Oy |
| Respiratory protection level | TH3 |
